+- Pack Goat Central (https://www.packgoatcentral.com/forums)
+-- Forum: Goats on the Trail (https://www.packgoatcentral.com/forums/forumdisplay.php?fid=4)
+--- Forum: Equipment & Techniques for the Trail (https://www.packgoatcentral.com/forums/forumdisplay.php?fid=5)
+--- Thread: Saddle dimensions (/showthread.php?tid=5768)
RE: Saddle dimensions - Moorefieldc - 08-08-2024
Finally got around to designing the side boards to lighten them up a bit
RE: Saddle dimensions - Moorefieldc - 09-06-2024
Slowly but surely making progress. Drilled holes for the basic lay out of the design next step is to mill them out and I'll finally be able to cut the one side down to size and theeennnn to finish the other side.
RE: Saddle dimensions - Moorefieldc - 09-09-2024
Finished one side board. Here's how it came out and the weight difference from before and after
RE: Saddle dimensions - Nanno - 09-10-2024
Very cool! I love seeing these updates!
RE: Saddle dimensions - Moorefieldc - 09-10-2024
Got the legs cut down to final length and hooked up one side of the rigging just to see how it all looked
RE: Saddle dimensions - Moorefieldc - 09-11-2024
Still have a few more odd and ends things to cut up and machine so some more weight will be lost but not bad at 6.14lbs for all the rigging and saddle. Now to make some pads
RE: Saddle dimensions - Missy - 09-11-2024
It's looking really good!!! I can't wait to see it on a goat! If you don't mind where did you get the rigging?
RE: Saddle dimensions - Moorefieldc - 09-11-2024
(09-11-2024, 01:14 PM)Missy Wrote: It's looking really good!!! I can't wait to see it on a goat! If you don't mind where did you get the rigging?
I got it from packgoats.com.
RE: Saddle dimensions - Missy - 09-11-2024
(09-11-2024, 03:43 PM)Moorefieldc Wrote:(09-11-2024, 01:14 PM)Missy Wrote: It's looking really good!!! I can't wait to see it on a goat! If you don't mind where did you get the rigging?
I got it from packgoats.com.
Thankyou!
RE: Saddle dimensions - Moorefieldc - 09-11-2024
All that work just to get covered up ? shortened up some bolts and reworked the flanges to help lose some weight. Now to figure out what I'm gonna do about a pad
