01-08-2019, 08:12 PM
Put my new harness rig on Garbie. It fits well. I need to shorten the girth strap attachment points. Other than that its rocking. I tried with the traces attacked only to the breast collar but the angle down was to steep and it put alot of pressure on the neck strap. I then ran the traces through the foot mens loop doublef back on them selves and it staitened the pull out enough to take the pressure off the neck strap. I then checked the trace line from.collar to load to see how far off of strait it was. The vector and was really shallow. I manually checked the hip strap pressure with my finger with the straces attached and traces not attacked while Garbie was in draft and there was very little if any change. I know it will be diffrent depending on load weight. Again Garbie seamed to barely notice anything was behind him.
As always do you see any thing wrong with the construction or anything else I am doing? I dont want to mess my sled up that why it not being dragged around. Thanks for all you help through this process.
As always do you see any thing wrong with the construction or anything else I am doing? I dont want to mess my sled up that why it not being dragged around. Thanks for all you help through this process.